IQ8Control M is an addressable fire control panel, suitable for medium-sized facilities. It ensures simultaneous management of all elements connected to the control panel, including elements on the loop, integrated inputs and outputs as well as all remote control and display devices. It is possible to select the esserbus® or essebus®-Plus technology via an electric jumper on the central power supply. Ideal for large areas such as industrial sites, shopping centers, buildings, offices and universities.
The IQ8Control M as an efficient fire alarm control panel (FACP) for the property supervision of mid-sized to large objects, facilitates simultaneous detection, control and alarm signaling both on the analog ring as well as on the spur.
The loop operation type of the panel (powered-loop or non-powered-loop) can be selected via a jumper located on the power supply card.
Depending on which loop operation type has been selected, the corresponding analog module/modules should be used.
• Max. five micromodules, with peripheral module Part No. 772477, up to five esserbus analog loop modules (system supports up to 635 digital loop addresses in total)
• Max. seven micromodules, with extension module Part No. 772476, up to seven esserbus analog loop modules (system supports up to 889 digital loop addresses in total)
• Short circuit and open circuit tolerant loop operation
• Loop installation with I-Y(ST)Y 0.8 mm cable for a maximum length of 3.5 km
• Up to 127 esserbus devices (fire detectors and/or manual call points)/detector zones per loop
• Up to 32 esserbus transponders per loop/operation of wireless components (see chapter 10)
• Operation types TM and PM as per DIN VDE 0833 – 2 to avoid unwanted alarms being triggered
• Fire brigade operating panel and transmission interface on the peripheral module
• Three common relays, freely programmable, monitored, floating for up to 30 V DC/1A (on the peripheral module)
• TTY or RS 485 or RS 232 interface
• Integration in the short circuit and open circuit resistant essernet network with up to 31 fire detection panels depends on transmission rate
• Connection to graphical supervisor WINMAG via serial essernet interface (SEI)
• Operating panel with alphanumerical display
• Large display with 8 rows with 40 characters. As follows rated – four rows with 40 characters for the status information (first and last message), and the other four rows with 40 characters are used for system information e.g. “Sounders Off”
• Event memory for up to 10,000 events
• All Systems 8000 micromodules are compatible
• Printer interface for internal printer
• Two batteries with monitoring circuit
• Monitored input for external power supply unit
• Additional features for powered loop
• Max. 6 analog powered loops and expandable up to 127 loop devices (per loop) in mixed mode / loop powered and non-loop powered (system supports up to 762 digital loop addresses in total)
• esserbus PLus (Powered Loop) supplied, synchronously controlled, acoustic alarm signaling devices as per DIN EN 54 – 3 with alarm tone as per DIN 33404
• Up to 48 powered loop base sounders (series 9200) per loop
• Up to 32 powered loop IQ8Alarm per loop
• Up to 48 IQ8Quad with alarm device per loop
| Rated voltage | 230 VAC |
| Rated frequency | 50….60 Hz |
| Rated current | 0,35 A (standard); 0,7 A (esserbus®-Plus) |
| Output voltage | 12 V DC |
| Quiescent current | approx. 215 mA (basic configuration without operating unit) - approx. 230 mA (basic configuration with operating unit) |
| Current consumption for ext. devices | 2 A |
| Battery capacity | Max. 2 x 12 V/24 Ah |
| Ambient temperature | -5°C…45°C |
| Storage temperature | -10°C…50°C |
| Air humidity | < 95% |
| Type of protection | IP 30 |
| Housing | ABS, 10 % glass fiber reinforced, V-0 |
| Color | gray, similar to Pantone 538 |
| Weight | Circa 11,5 kg (senza batterie) |
| Dimensions | L: 450mm A: 640 mm P: 185mm |
| Declaration of Performance | DoP-20827130701 |
